Axis Communications M5013 Manuel d'utilisateur télécharger pdf (Page 8)

AXIS M5013 PTZ Dome Network Camera

Accessing the product

Note

• The default administrator user name root is permanent and cannot be deleted.

• If the password for root is lost, the product must be reset to the factory default setting s. See Reset to factory default

settings, on page 41.

Set Power Line Frequency

Power line frequency is set the ﬁrst time the Axis product is acce ssed and can only be changed from Plain Conﬁg or by resetting the

product to factory default.

Select the power line frequency (50 Hz or 60 Hz) used at the location of the Axis product. Selecting the wrong frequency may cause

image ﬂickeriftheproductisusedinﬂuorescent light environments.

When using 50 Hz, the maximum frame rate is limited to 25 fps.

Note

Power line frequency is different in different geographic regions. In the Americas, 60 Hz is usually used; most other parts of

the world use 50 Hz. Local variatio ns may apply, always check with the local authorities.

The Live View page

If the Axis product has been customized to meet speciﬁc requirements, not all the items described below will appear in the Live View

page. The following provides an

overview of each available button.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 49 50

Pas de commentaire

Axis Communications M5013 Manuel d'utilisateur Page 8