Axis-communications CD E100 Manuel d'utilisateur télécharger pdf (Page 133)

Appendix B: Troubleshooting

AXIS StorPoint CD E100 User’s Manual 133

Running a Diagnostic Test

The StorPoint CD Web Pages include a diagnostic test that you can run in order

to check the memory and the performance of the connected drives.

Before You Begin Note the following:

• Users that are currently accessing the StorPoint CD will be interrupted.

• The diagnostic test is only available the first hour after startup.

• If you want to repeat the test, you must first restart the StorPoint CD.

• In order to test the data transfer performance of a drive, a disc including a

file larger than 10 MB must be inserted.

Procedure To perform the diagnostic test, follow these steps:

1. Start the Web browser, and enter the URL of the Diagnostics page in the

location/address field:

Example

2. The Diagnostics page appears:

Make sure a suitable disc is inserted into each of the drives you want to test.

3. Start the diagnostic test by simply reloading/refreshing the Diagnostics page.

The test takes a few minutes to complete.

4. Reload/refresh the page once again to display the results.

http://<IP address>/this_server/diag.shtml

http://192.16.253.80/this_server/diag.shtml

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 162 163

Pas de commentaire

Axis-communications CD E100 Manuel d'utilisateur Page 133